0
0 Cart (empty)
Ultrasonic anemometer WUS4423 IED

Ultrasonic anemometer WUS4423 IED

Ultrasonic wind direction and speed sensor

Reference
WUS4423
Preorder

The WUS4423 sensor by IED measures wind speed and direction thanks to its ultrasound transductors. Comparatively to traditional cup wind sensors, ultrasound sensors have a much higher reactivity to wind speed change, a very low speed start and offer a wind direction measurement without blindspots. Moreover, as they do not have moving parts, they are less susceptible to wear in harsh environments. The WUS4423 has a Modbus RTU over RS485 output which is partially configurable. The wind speed can be read directly in km/h or m/s. Both instantaneous and average speeds are available.

A version with a terminal resistance of 120Ohms is available on demand.

Technical sheet 4423 (EN/ES)

Download (993.52KB)
Miscellaneous
Composition
PA + GF
Power supply
9-30VCC
Size
162cm (height) x 143cm
Weight
400g without cable
Operating temperature
-25°C - +70°C (without frost)
Protection
IP65
Output
RS485
Current consumption
10mA max
Protocols
Modbus
Wiring
Connecteur M12-4, 5m cable with bare wires by default
Storage temperature
-35°C - +80°C
Diameter
143cm
Response time
inf. 5s
Wind
Measure
Wind speed
Units of measurement
km/h, m/s
Resolution
1km/h or 0.01m/s
Accuracy
+/-0,5km/h up to 15km/h, +/-3% from 15 to 120km/h, +/-5% above
Measuring range
0-160km/h, survives until 200km/h
Trigger threshold
0km/h
Wind direction
Measure
Wind direction
Units of measurement
°
Resolution
Accuracy
+/-3°
Measuring range
0-360°