Hydro series weathervane INT30H
On quotation
Combined analog anemometer and wind vane
€869.00
(tax incl.)
(€724.17 VAT excl.)
Anemometer and wind vane with analogue 0-10V or 4-20mA outputs (optional). Equipped with a heating system against frost.
The anemometer is used for control in the building industry and in weather stations. The wind speed is measured in m/s for a 4-20mA or 0-10V output signal. All anemometers are equipped with an internal heater to ensure proper operation in winter.
The wind vane is used for control and regulation in the field of building management or for weather stations. The measured value of the wind direction in degrees is converted into an analogue 4-20mA or 0-10V signal. These sensors are equipped with an internal heater for optimal operation in winter.
- Miscellaneous
-
- Composition
- Bearings made of nitriding steel
- Measure
- Wind speed ; Wind direction
- Power supply
- 24 VDC
- Size
- Height 40 cm
- Weight
- 2.5 kg
- Operating temperature
- -35 to +70°C
- Protection
- IP65
- Output
- 0-10 V ; 4-20 mA
- Wind
-
- Measure
- Wind speed
- Accuracy
- ±3%
- Measuring range
- 0 to 35 m/s
- Trigger threshold
- 1 m/s
- Wind resistance
- 60 m/s
- Cup diameter
- 160 mm
- Wind direction
-
- Accuracy
- ±3%
- Measuring range
- 0 to 360°
10 other products in the same category:
Professional Weathervane
On quotation
Analog anemometer for building
€415.00
(€345.83 VAT excl.)
Anemometer 4403v3
On quotation
Professional Anemometer
On quotation
Anemometer with alarms for construction...
On quotation
Potentiometric weathervane
€446.00
(€371.67 VAT excl.)
Ultrasonic anemometer WUS4423 IED
On quotation
Anemometer with display and programmable...
€469.00
(€390.83 VAT excl.)
Ultrasonic Anemometer Modbus
On quotation