UV probe
UV sensor for Davis Instruments Vantage Pro 2 weather station to measure UV index and UV dose.
Probe for measuring UV index and dose. The probe housing has been designed to reduce heating of the internal sensor. The probe is equipped with a spirit level for easy installation and a 60 cm long cable. The probe connects directly to the ISS SIM card in your Vantage Pro 2 station. To install this probe on an ISS Vantage Pro 2, you need the optional Davis 6673 bracket, which also attaches the 6450 pyranometer.
This sensor is included directly with Vantage Pro 2 Plus weather stations.
Reviews subject to control
Based on 1
review
-
Set up more than a week ago, works very well. (Translated review)
- Miscellaneous
-
- Composition
- Plastique PVC résistant aux UV
- Size
- 51 x 70 x 57 mm
- Weight
- 0.226 kg
- Operating temperature
- -40°C à 65°C
- Output
- 0-2.5 V
- Wiring
- RJ11, 4 conducteurs, 26 AWG
- Storage temperature
- -45°C à 70°C
- UV Index
-
- Units of measurement
- Indice
- Resolution
- 0.1
- Accuracy
- ±5% à pleine échelle (Référence: Yankee UVB-1 pour un indice UV de 10 [très élevé]) plus indice UV de 0.5 par câble additionnel de 100 ' (30 m)
- Measuring range
- 0 à 16
- Measurement frequency
- 50 secondes à 1 minute (5 minutes lorsque sombre)
- UV radiation dose
-
- Units of measurement
- MEDs
- Resolution
- 0.1 MED à 19.9 MEDs, 1 MED au-dessus de 19.9 MEDS
- Accuracy
- ±5% du total journalier
- Measurement frequency
- 50 secondes à 1 minute (5 minutes lorsque sombre)
- Drift
- jusqu’à ±2% par an
You might also like
10 other products in the same category: