Thermo-hygrometer MeteoTemp®

€364.00 (tax incl.) (€303.33 VAT excl.)

Delivery in 1 to 5 days in Europa

The MeteoTemp® probe measures air temperature and relative humidity. It also derives the dew point and frost point. The RH+T+P variant measures the atmospheric pressure as well. The probe has a very low power consumption. Its accuracy, resolution and stability meets the World Meteorological Organization quality standards. It also has a industry-grade lightning and surge protection.

Reference

MT-TH-C05-485R-D

MeteoTemp® Variant

RH+T
RH+T+P

Output

Modbus RTU or ASCII
Analogic 0-1V

Last items in stock (1 Item)

Description
Downloads

The MeteoTemp® probe is an industry-ready thermo-hygrometer. Its very low electric consumption of 800µA limits overheating, especially when used in a MeteoShield® anti-radiation shield. The sensor is very stable and can be calibrated again if needed.

There are two versions of the sensor: version RH+T outputs temperature, relative humidity, dew point and frost point whereas version RH+T+P additionally outputs atmospheric pressure.

The self-cleaning cap on the probe can be replaced.

MeteoTemp® is resistant to lightning and surge, which makes it suitable for difficult environments and avoids missing on any measurement.

The probe native output is Modbus ASCII or RTU, on a RS-485 link. It's also possible to use a conversion box to convert the Modbus output to an analog output (0-1V). The box measures 98x18x55mm, weighs 50g and can be mounted on a DIN rail.

Technical sheet MeteoTemp (EN)

Download (371.17KB)

Calibration Guide MeteoTemp (EN)

Download (99.33KB)

Data sheet

Miscellaneous

Power supply: 5 - 15VDC
Size: 133mm (excl. connector) / 164mm (total)
Weight: ~20g (excl. connector and cable)
Operating temperature: -40°C ... 105°C
Protection: IEC EN 61000-4-2,-4-4 et -4-5, Surge, EFT / Burst, ESD 15kV (lightning and surge)
Output: Modbus RTU or ASCII RS-485
Current consumption: 800µA at 1Hz output
Diameter: 12mm (probe cap) / 17mm (base)

Temperature